DJ Products, Inc.

When a warehouse or material handling accident is mentioned it often conjures up images of something serious, like a large rack collapse or a forklift that’s been driven off of a dock.  Though these are accidents that certainly can and do occur, they are in reality much more rare than the most common type of accident seen in warehousing – the trip (or slip) and fall.

When your employees have to physically carry materials from one location to another (locations that are often on different levels), lines of vision can get impaired making it difficult or impossible to see obstacles, spills or alterations in the surface that could lead to a nasty fall.  The potential for injury when a fall occurs, when the subject is carrying something, is greater due to the fact that the person can’t easily brace themselves for the impact because their hands are occupied.

These potentially dangerous accidents could easily be avoided if your material handlers were using equipment that was ergonomically designed for moving material rather than having to manually move it.  DJ Products carries a wide array of equipment that is safe and reliable and that will greatly lessen the chances of dangerous accidents in your warehouse.  The lifts and carts from DJ Products will quickly move material (much more than could be manually moved by an individual) and will put it in the proper position for your employees to lift.  Since the lifts are doing the work, your employees can focus and concentrate on the path they are traveling which will drastically reduce the chances of a trip or slip and fall accident.

When you can effectively eliminate the most common accidents from your work environment, you make it a much safer place for your employees.  You’ll lose less man hours to injury and increase your employee’s productivity, which can also do wonders for your bottom line.

“Ergonomics and Reducing the Pain in Worker’s Comp” is the topic of a workshop scheduled for 11:30 a.m. to 1 p.m. on Wednesday, January 20. Sponsored by the Northern Minnesota Safety Council, the workshop will be held at the Bemidji State University Center for Research and Innovation at 3801 Bemidji Ave. N, Suite 4, Bemidji, MN. Cost of the program is $25 per person; lunch will be provided. To register or for more information, visit the Center’s website at www.cri-bsu.org.

The workshop recognizes two forces that are coming together to reshape American industry: the high cost of health care and increased governmental regulation of workplace safety. With Congress on the verge of approving a national health care plan and the Obama administration in the midst of reviewing OSHA ergonomics standards in anticipation of ordering more stringent workplace safety standards later this year, the workshop should provide attendees with a more thorough understanding of the impact ergonomics can have on their business. The program will feature Joe Kapaun of Choice Therapy with expertise in onsite ergonomic systems evaluations and industrial rehabilitation.

Ergonomics has been proven to reduce workplace musculoskeletal injuries which account for the majority of worker’s compensation claims. Worker’s compensation claims cost American businesses more than $60 billion annually, according to the U.S. Department of Labor. The National Council on Compensation Insurance reports that more than 50% of those claims are for back injuries from lifting, pulling, pushing and straining. Ergonomically-designed material handling equipment significantly reduces worker injury from manual labor tasks, resulting in significant worker’s compensation savings. The Bureau of Labor Statistics calculated the estimated time-lost cost per injury at $26,000 per incident. Prevention of a single injury by implementing use of ergonomically-designed material handling equipment results in an immediate savings of $26,000. 

To find out how ergonomic material handling equipment can help you reduce worker’s compensation costs, visit the DJ Products website.Â

Scheduled for March 22-25, the 2010 Applied Ergonomics Conference (AEC) to be held in San Antonio, Texas is slated to be North America’s biggest and most impressive gathering of ergonomics experts, applications and equipment providers. What sets AEC apart from other ergonomic conferences is its emphasis on the practical application of ergonomic principles and discoveries to real world industrial problems. This is not an esoteric meeting of high-brow academics, though you’ll find the more practical of their ilk in attendance. This is a working man’s conference. A meeting of industrialists, ergonomic experts and others involved in day-to-day efforts to improve the health and safety of American workers through the application of ergonomics to real world problems.

 The 2010 AEC conference will be held at the Marriott San Antonio Hill Country Resort and Spa with early registration discounts available through January 15, 2010. Ergoweb is offering a special 50% discount to its followers until this Friday, December 18 on registrations for the conference and host hotel. (Click here for registration form and more information from Ergoweb.)

Keynote speakers scheduled include Y. Ian Noy, vice president and director of Liberty Mutual Research Institute for Safety, and Guy Fragata, senior advisor for Ergonomics Patient Safety Center of Inquiry. Multiple educational tracks and numerous informational exhibits by leaders in the ergonomics industry will also be featured at the conference.

As a leader in the design and manufacture of ergonomically-designed material handling equipment, DJ Products is intimately involved in solving daily ergonomics problems in a wide variety of U.S. industries including manufacturing and heavy industry, hospitality, hospital and health care, automotive and commercial retail. We understand the critical need for ergonomic systems and ergonomic material handling equipment that protects the health and safety of American workers. To find our more about our full line of ergonomic motorized carts and tugs, visit the DJ Products website.