DJ Products, Inc.

At a major food processing plant, workers had to manually push heavy meat carts to maneuver them between processing stations. Concerned about injury risk and worker safety, plant executives turned to DJ Products for ergonomic solutions to their material handling problem. Our experts recommended the CartCaddyShorty power tugger, a motorized cart mover designed to push, pull and maneuver carts that require turning. 

The battery-operated CartCaddy Shorty is the most maneuverable tug on the market today with the power to handle most push/pull applications. Most commonly used with carts that have two front swivel casters and two straight casters, the ergonomically-designed CartCaddyShorty attaches to the swivel end of the cart to provide the power necessary for easy pushing, pulling, turning and intricate maneuvering. Heavy carts that usually require two workers to maneuver can be easily managed by a single employee. The tug takes the physical burden off your workers, eliminating the exertion and straining that can cause serious and expensive musculoskeletal injuries.

Musculoskeletal injuries cost U.S. businesses billions of dollars in medical, insurance, workers’ compensation and lost man-hour costs each year. According to OSHA statistics, back injuries alone cost businesses $12 million in lost workdays and $1 billion in compensation costs annually. The time-lost cost of a single back injury is estimated at $26,000.

Through proactive use of the CartCaddyShorty, this major food processer was able to eliminate potential musculoskeletal injury risk at its facility. They also realized an increase in productivity and improved employee moral after introduction of DJ Products’ ergonomic power tugger. The CartCaddyShorty has also proved effective in hospital, hospitality and retail applications.

Click here to learn more and to watch a video of the CartCaddyShorty in action. The world leader in providing cart tuggers and equipment movers to the manufacturing, hospital and retail markets, DJ Products offers a full line of ergonomically designed, powered carts, tugs and movers.

Today we continue our September 15 post on developing a proactive plan to reduce costly workplace injuries.

2. Set priorities.

After you have determined activities and areas that carry a high risk of injury, set priorities for initiating improvements. Activities resulting in the most severe and most frequent injuries should receive the highest priority, followed by those garnering the highest incidence of worker complaint. Other factors to be considered include technical and financial resources at your disposal and the difficulty in implementing improvements. Be sure to include worker ideas in your plan. Develop a timeframe for making improvements. Communicate the plan and timeline to managers and workers.

3. Implement improvements

Ergonomics — improving the fit between worker tasks and worker capabilities — should drive implementation of your injury-reduction plan. Manual handling of materials and products should be reduced or eliminated wherever possible. Operations and processes can often be combined or restructured to reduce manual tasks. Task procedures can be modified to reduce the strain of unavoidable manual tasks. Ergonomically-designed equipment can eliminate or dramatically decrease the need for physical effort. Don’t neglect proper training for new equipment, procedures, processes, etc.

4. Follow up.

After implementation of each improvement and after allowing for a reasonable adjustment period, it is important to follow up with an evaluation of effectiveness. Review reports and data for signs that injuries, fatigue, discomfort, complaints and risk factors have been reduced or eliminated. Talk to workers to see whether improvements have been accepted and assimilated, that training has been sufficient, and whether there are new complaints. Look for new problems that may have been resulted from the changes made. Refine your plan and made additional improvements as necessary. 

The technical specialists at DJ Products can assist you in evaluating the ergonomic needs of your business. DJ Products manufactures a wide range of ergonomically designed carts, pushers and tugs designed to eliminate and reduce worker injuries. Contact a DJ Products specialist today to find out how you can use ergonomic equipment to reduce injuries in your workplace.

Reducing workplace injuries is every responsible business owner’s goal. Not only do you value your employees’ health and safety, but the cost of ignoring workplace safety – high medical, insurance, workers’ compensation and lost man-hour costs — can be staggering. It pays to be proactive in looking for potential injury-causing problems and coming up with ergonomic solutions that improve the fit between the work and the worker.

Developing a proactive plan to reduce workplace injuries is a four-step process:

1. Observe and question
2. Set priorities
3. Implement improvements
4. Follow up

1. Observe and question.

Look for clues to possible problem areas in available statistical data. Check injury reports for patterns that indicate higher injury rates for certain tasks or in certain areas. OSHA logs, worker reports and complaints, absence rates, and workers’ compensation reports are good starting points. Ask if your workers’ compensation insurance carrier provides workplace assessment surveys as part of their risk-management services.  

Look at production reports for bottleneck areas. Check quality control reports for poor quality product or service. Problems can indicate areas where workers are having difficulty completing tasks effectively under current conditions. The root cause of such problems is often poorly designed equipment or task procedures.

Spend some time following the entire process of your business from start to finish. Pay particular attention to areas highlighted by the data review. Observe the way workers do their jobs. Watch for risk factors such as awkward postures, repetitive motions, forceful exertions, pressure points or extended periods spent in the same position. Watch for signs of worker discomfort or pain such as self-restricting movements, efforts not to move certain body parts or massaging hands, arms, legs, necks or backs. Pay attention to unnecessary handling and duplication of material or product movement.

Look for ways in which workers have modified standard procedures to make it easier to do their work, including modifications to tools, equipment, workstations or task performance. Talk to managers but also talk to the workers who actually perform the tasks. Ask workers how they would change the work process, operations, tools or equipment to make their jobs less physically demanding and more efficient. You’ll get a clear idea of what isn’t working and may get some excellent suggestions for improvement.

Continued next time